The first step is to provide Lemur and Gig Performer with the contact information of each other. The contact information consists of two parts: the IP address of the device and the port number to which the application is listening for messages. When configured properly the communication can be established.
Important note: Deskew Technologies cannot provide support for either the Lemur application or wireless communications in general. However, we offer the information below to try and facilitate Gig Performer users getting the two applications working together.
1.In Gig Performer, choose the Options -> OSC Setup command. The OSC Options open.
2.The IP address of the computer running Gig Performer is shown in the Gig Performer IP address display. The port to which Gig Performer is listening for OSC messages is shown in the Gig Performer listening port field.
3.In the Lemur app, open the Settings menu and choose the More Settings… command.
4.In the OSC Targets area, enter the IP address of the computer running Gig Performer into the Host field, and the port in the Port field.
5.The Lemur IP display shows the IP address of the device running Lemur. The right-most segment, after the colon (":") is the port. Enter this into the Remote client IP address field in the OSC Options in Gig Performer.
6.Enter the port portion of the Lemur IP display into the Remote client port field.
7.Turn on the Use augmented Lemur messages toggle button in the OSC Options. This enables Gig Performer to send more detailed OSC messages, which Lemur can handle (turn it off when using Gig Performer with TouchOSC or other more basic OSC applications).
8.For the most reliable communications, launch Lemur first, then launch Gig Performer.
