Gig Performer's Recorder provides a simple way to capture every audio input channel to its own wave file, paving the way to capturing the entire raw live performance of a band for later post processing. The feature is aimed mostly at FoH engineers who are...
The Rig Manager is used to isolate the particular keyboards and/or MIDI controllers (MIDI pedal boards, etc.) from your actual rackspace setups. The fundamental idea is: - you name your physical devices in the Rig Manager, - and you use those names when you are creating MIDI...
Major new features in Gig Performer 3: Songs and Setlists ChordPro Support Ableton Link Synchronization Bi-Directional MIDI Widgets Enhanced Remote Support for Lemur MIDI Input Recorder Multi-widget insertion Latency Measurement Tool Gig Performer 3 also includes audio engine enhancements, better plugin editor handling, SysEx message support,...
A much requested feature in Gig Performer was an Audio Mixer, a multi-channel gain control plugin. Instead of creating separate gain controls after each synth plugin, you could use a single plugin to control the gain of multiple plugins. Our plugin comes in 4ch (two...
Gig Performer 2 ships with a built-in programming language GPScript that can be used to develop very sophisticated behavior for live performance. GPScript gives Gig Performer some "open endedness", providing the ability to add features that are not already built in to the product. A...
Scaling curves allow you to control the shape of the output of a widget or convert an incoming note velocity to a new velocity. Various predefined curves are available and they can be tweaked as necessary. You can also just draw your own curve as well to achieve the effect you require.
Create a sound by placing and interconnecting your desired plugins, such as a synth, some effects and perhaps a mixer. Select them all and then save the selection as a named favorite. The favorite will subsequently show up in all plugin insert menus, making it easy for you to recreate that configuration whenever you need it again. This feature is also very powerful for creating your needed sounds on your studio computer and then transferring them to your touring laptop.
Parameters you select in an open plugin are captured into the Probabilistic Sound Designer dialog window. When you click Randomize, you're only adjusting those selected parameters. Each entry in the PSD dialog has a curve but unlike widgets where the curve controls scaling, in the PSD the curves are used to define the probability of particular values being selected. Make sure the filter cutoff never gets too slow so as to block all sound. Perhaps adjust the max range of the VCA attack parameter so that the sound doesn't have too much delay. Constrain the octave ranges of the oscillators, perhaps ensuring that 1/3rd of the time we select 8' and 2/3rds of the time we select 4'. The possibilities are endless.
Numerous new widgets are included in Gig Performer - a new sustain pedal, plastic knobs, drum pads and more colored sliders. Shapes can be colored with different borders and fill colors and morphed from rectangular to circular. Your creativity is now the limit to creating fabulous front panels in Gig Performer.
Some plugins support a large number of outputs and they depend on the traditional channel strip to control how many ports should be available. When you only need a stereo pair, it is convenient not to have a large horizontal block. In Gig Performer, the number of available ports is controlled by the channel count override, which can be applied to individual plugins and will be remembered when the gigfile is reloaded or if the plugin is saved as a favorite.
Rather than a single audio length tail, Gig Performer 4 gives you the ability to control input muting and output fading separately. Input muting controls how much time it takes for audio input to be silenced when you leave the rackspace. Output fading controls how much time will be taken for audio to fade out when you leave the rackspace.
Instead of searching through menus of perhaps hundreds of plugins (you know who you are!), the Quick Plugin Finder makes it easy to find the plugin you need by simply typing partial strings. For example, as shown here, to find the Modartt Pianoteq 7 plugins, it's enough to type pia mod 7 (in any order, by the way) to restrict the list of available plugins to those matching your query. The Quick Plugin Finder also knows about manufacturers, presets and favorites.
Any entry field can be changed by either dragging your mouse (or finger) up or down, or by using the large popup touchpad where you can just tap on the squares to enter a value. The large popup keypad also does validation so you can't enter an invalid value. You can also just tap the BPM field to pop up a larger view where you can quickly change tempo, tranpose, trigger Tap Tempo and enable Ableton Link, the last allowing you to synchronize Gig Performer with any other application that also supports Ableton Link.
The tuner view makes it easy for guitarists to quickly check and adjust their tuning. You can toggle into the tuner view from any other view and toggle right back as soon as you're done. All output will be silenced automatically while you're in tuning mode. You can adjust the concert reference pitch from its default of 440 Hz to suit your own needs. The tuner view fills the entire screen so you can easily see it from a distance.
GP Script adds new language improvements such as multiple initialization sections, initialization with declarations and enhanced callbacks. The WidgetValueChanged callback now supports multiple widgets. Sysex messages are now built-in with numerous supporting functions. String array handling is much faster. Integer bit manipulation is now built-in. A new global GigScript allows incoming MIDI messages to be modified and redirected on the fly. It also allows you to define keyboard macros for your computer keyboard to control Gig Performer itself. For complete information, please review the GP Script Language Manual available through the Help menu.
Scriptlets make creating custom MIDI processors easy. You don't have to be a programmer to use them - you can just download scriptlets from our ever-growing collection on our website and drop them right into your rackspaces to use them. Use scriptlets for simple operations such as turning your single notes into chords, modifying, duplicating or converting one kind of message into another, automatic chord latching (AutoSustain), threshold detection, sysex manipulation... imagination is the limit.
Numerous other enhancements and optimizations serve to make Gig Performer 4 a superb platform for performing artists.
The Global Rackspace can receive audio from whatever rackspace is currently active. Instead of inserting effects in every rackspace, simply insert them once in the Global Rackspace and all your local rackspaces will have access to them. The Global Rackspace can also send audio to the currently active rackspace. So you can insert a looper that receives audio directly from your guitar (say) and then send the looped audio to different effects in different rackspaces. If a particular instrument such as a piano or organ is needed everywhere (or almost everywhere), put it in the Global Rackspace.
Gig Performer 4 provides a virtual view allowing you to spread out your blocks and connections to make them easier to see and manage, even if you have a very small screen. You can zoom in or out and you can use the Auto-Fit option to position your blocks to fit in the available space.
Click here to see the complete list of release notes for Gig Performer 4.5
